Made from BK7 material, which has transparent range from 330-2100nm. The refractive index is 1.5168 at 587.6nm. The BK7 window has good performance over visible and near IR spectrum for most application.
Achromatic Waveplate Achromatic Waveplates(Retarders), AWP is composed of one piece of Crystal Quartz and one piece of Magnesium Fluoride, MgF2.
Barium fluoride (BaF2) shows good optical transmission over UV-IR windows in 0.15μm~12.5μm.
MgF2 windows are used in the UV, visible and IR ranges, with approximately 94% transmission from 200 - 1000 nm, and approximately 95% transmission from 1-6µm
CaF2 has transparent range from 170-7800nm. The refractive index is 1.399 at 5000nm. 1. Low absorption coefficient 2. High damage threshold, 3. Low Dispersion (with an Abbe Number of 95) 4. Low fluorescence 5. Excellent water, chemical, and heat resistance
Hollow Retroreflectors are constructed of three first-surface mirrors assembled by a proprietary process into a mutually-orthogonal inside corner.
Incident Light is Reflected Back to the Source
Hollow Lightweight Design
product orgin:
Chinashipping port:
Fuzhou Chinapayment:
T/T Payment, Western UnionHigh Accuracy Coated Hollow Retroreflectors
Hollow Retroreflectors are constructed of three first-surface mirrors assembled by a proprietary process into a mutually-orthogonal inside corner. The mirrors can be coated for maximization over a spectral range, from UV to far IR. Standard mirror coatings are aluminum, silver and gold,.
WTS offer cutomized size, coating and accuracy Hollow Retroreflectors products.
Specifications:
Material:
N-BK7 ; UV Fused Silica, Zerodur etc.
Dimension Tolerance:
+0.0, -0.2mm
Surface quality:
60-40 S/D
Surface flatness:
λ/2 @ 632.8nm
Beam Deviation (arc.sec.)
30“, 15", 10", 5" etc.
Clear Aperture:
>85% of dimension
Bevel:
<0.25mm×45
Coating:
Aluminum, Silver and Gold
Double Concave Lenses, Bi-Concave Lenses is like the Plano-Concave lenses in that they are used to produce divergent light. The Bi-Concave is best used when the input beam is converging. 1. Supported by the Zemax Optical Design Package 2. Negative Focal Length 3. Material upon requirement
Rod lenses Light pipes is used in the fields of medical, electronic, information, agriculture, communication and etc. 1.All surfaces (end-faces and cylinder)polished; 2.Only end-faces polished; 3.Only Cylinder polished.
Dielectric Mirrors offer near total reflection, minimizing losses in nearly all optical systems. AOI=45°, R>99.5% (Rs>99.9%, Rp>99.2%). AOI=0°, R>99.8%
Great for Use in Laser Cavities Circular Profile When Oriented at 55.57° Uncoated UV Fused Silica Brewster Windows
Infrared Zinc Selenide Lenses, windows is for High-Power CO2 Lasers Primary candidate for high-power CO2 Lasers windows For windows, domes and lenses for full infrared region devices, especially for high resolution FLIR systems 1. Broadband AR Coating for the 7 - 12 μm Range 2. Compatible with Visible Alignment Lasers
ZnSe is used widely for IR components, windows and lenses, and applied for Thermal Imaging, FLIR, Medical systems and Co2 Laser
friendly links :
copyright © 2024 WTS PHOTONICS CO., LTD.all rights reserved. powered by dyyseo.com .
wts photonics